BAFFLE DIMENSIONS:
Height: 75.6"
Top width: 19.25"
Base width: 34.5"-Sides~14"&17"
Thickness: ~1.56" Half-round edges
The Impulse, Phase and Frequency response are from an RD-75, serial number ending in '54'. The measurements were taken at distance of 2 meters, and 1 meter height. The baffle is named for the 9" and 6" base right-triangles added on alternate sides of the 'ROUNDS' baffle.
Details of the measurement process are to be found in the Measurements
section. The required passive notch filter was in circuit with the driver
during the measurement. Additionally, a non-standard slope 2nd order
(12dB/oct) active filter set to a -3dB point of 150Hz was also in circuit.
The rising phase response below 1000Hz reflects this fact.
BAFFLE DIMENSIONS:
Height: 75.6"
Top width: 19.25"
Base width: 34.5"-Sides~14"&17"
Thickness: ~1.56" Half-round edges
Baffle: 9&3.
Comparison: ASYMMETRIC TRAPEZOIDS.
Table of Contents - Two-Sided Baffles.
Table of Contents - Main Menu.
